Monday, February 23, 2015

SC430 Engine mount replacement and transmission flush

I've been hearing a kind of clunking noise when I crank up the car in the morning. The more I paid attention to it I could kind of see the front of the car kind of lifting on one side followed by a clunk. I was also feeling vibrations at a stop light and slight intermittent vibrations at highway speeds. With all the other suspension components addressed, I had a strong feeling it was a mount related issue.

All new mounts were ordered, two engine and one transmission.



A buddy of mine Mark helped me with this one. With the car on the lift, a transmission jack was used at the edge of the oil pan to support the engine. 





Undo the two bolts holding the motor mount onto the sub-frame and the four bolts that hold the complete mount to the engine block. It was easier to remove the complete mount as opposed to trying to loosen the one bolt up top for the engine mount itself. Once loose you will have to use the transmission jack to lift the motor about an inch and a half so that the mounts can slide out.



The driver side mount was completely shot, as you can tell by the picture.



The passenger side mount was on it's way out, might not be visible in the picture but the top had a rip in it and was starting to separate.



Replaced the engine mounts and did the same for the transmission mount. Used the transmission jack to support the transmission. Undid the 4 bolts and removed the transmission bracket and the 4 bolts for that hod the mount to the transmission. 




The transmission mount didn't look bad on a visual inspection. There was some sort of coating that was flaking as you can see in the pic but didn't look torn, or see any stress cracks etc.


Replaced the transmission mount and then onto the transmission flush.

Drained the oil from the pan first, collected the oil in a measuring jar so that I could make a note of how much fluid was coming out. About 2 qts came out from the drain plug and then proceeded to take the pan off. 


Put the drain plug back in because there is still oil in the drain pan. I learnt from the last time a flush was done on my other car. With the pan off poured the oil in the pan into the measuring jar as well, there was about 1.5 quarts of oil in the pan. 

The oil was a dark brown and not the red it is supposed to be. Also two days prior to this I had put in 0.5 pints of Seafoam trans tune to help break down any build up etc in the transmission. 


The transmission pan is held in place by Toyota Fipg so it'll take a little yanking to get the pan off. Cleaned up all the fipg off including the 3 magnets in the pan along with the pan itself. I didn't use fipg to put the pan back, instead Felpro makes a transmission pan gasket for it and that's what I used. I've used this method before and have had no issues. Just make sure you don't go ham on the bolts, snug it up there to about 15-18ft/lb where you see the gasket just starting to squeeze away from the pan a little. 



Installed a new transmission filter as well.



Also adjusted the pressure regulator on the tranny so it shifts faster. The pic shows the factory setting but pressing it in and turning it clockwise to the third setting increases the pressure resulting in faster shifts. Firmer faster shifts result in longer tranny life and has been well documented on Club Lexus.


With the pan back in place filled fresh ATF through the dip stick. Just the 3.5 quarts that came out of the pan.


Once filled, hooked up the transmission flush machine to the transmission cooler lines, feed and return.


Switched the car on and the machine beeps to verify the right connections. If it doesn't beep then the lines are on backwards. With everything hooked up right initiating the flush on the machine drains the old oil out and replaces it with fresh ATF. I used Amsoil ATF for this. Went through 12.5 quarts on the machine till the old fluid coming out was cherry red as well. So a total of 16 quarts, 12.5 using the machine and 3.5 that was filled in the pan after it was drained and emptied. 

While we were there went ahead and changed the differential fluid out as well with the Amsoil 75W-90 Long Life Synthetic Gear Lube. 

Buttoned everything back up and took it for a spin.  The fresh tranny fluid always seem to smoothen out the shifts from previous experience, and it did so this time too even after increasing the pressure sensitivity. The tranny does shift faster but I don't feel it, I can tell more so by looking at the RPM dip as it changes gear.

I don't have the engine lift on start up nor the vibrations at stop lights etc. Even the intermittent vibrations at highway speeds are gone. 

I'll check on the transmission pan gasket in a couple of days to make sure everything is good and there are no leaks just to be on the safe side. 

Overall HAPPY HAPPY!! 

-AJ Abraham

Follow me on Instagram:
@flawless_fitment
@aj_ls460 
@aj_lx470
@aj_sc430

45 comments:

  1. What year is your Lexus, and where did you get tha grill w/o a logo? (My '06 looks like the logo is non-removeable, cast right into the crossbars.

    ReplyDelete
  2. Not only replacing a machine in the car but also changing he oil, changing the brake pads and other maintenance need a better quality jack. Other information you will find in this Best Car Jack guide.

    ReplyDelete
  3. Nice presentation. Just bought 2002 sc430. Gonna do the same. Many thanks.

    ReplyDelete
  4. Seen this many times, now my SC needs the same items replaced. I need to get my Lexus mechanic scheduled for these...time to spend some $$.

    ReplyDelete
  5. I read an interesting topic here, and I like your style. Thanks a million, and please continue with effective work. Thank you for sharing this blog here. Car Servicing Onehunga

    ReplyDelete
  6. Great job for publishing such a nice article. Your article isn’t only useful but it is additionally really informative. Thank you because you have been willing to share information with us.junk yard

    ReplyDelete
  7. Nice information, I am heartily very thankful to you for providing this kind of special knowledge. This information will always help everyone for gaining knowledge. Always keep sharing. Thanks. used engines for sale near me

    ReplyDelete
  8. You have given important data for us. It is excellent and informative for everyone. Always keep posting. I am very thankful to you. Read more info about scrap my truck

    ReplyDelete
  9. Nice info, This information will always help everyone for gaining essential and good information. So please always share your valuable information. I am very thankful to you for providing good information. Read more info about auto wreckers

    ReplyDelete
  10. You have provided valuable data for us. It is great and informative for everyone. Keep posting always. I am very thankful to you. Read more info about scrap car removal

    ReplyDelete
  11. You have given important data for us. It is excellent and informative for everyone. Always keep posting. I am very thankful to you. Read more info about scrap car for cash auckland

    ReplyDelete
  12. You have provided valuable data for us. It is great and informative for everyone. Keep posting always. I am very thankful to you. Read more info about broken truck buyer

    ReplyDelete
  13. I am very thankful to you for sharing this best knowledge with us. This information is helpful for everyone. So please always share this kind of knowledge with everyone. Thanks. Read more info about truck dismantlers

    ReplyDelete
  14. I am grateful that I was able to learn something useful from this article. After reading it, I believe you possess excellent expertise. Thank you for sharing about Repairable Writeoff Perth. Keep up the good work.

    ReplyDelete
  15. You have given important data for us. It is excellent and informative for everyone. Always keep posting. I am very thankful to you. Read more info about rubber seals

    ReplyDelete
  16. I'd like to express my gratitude for sharing such an excellent article. The article is instructive because it offers some useful information. Thank you for sharing about Caterpillar Bottom Rollers. Continue to post.

    ReplyDelete
  17. I really want to thank the author for such a nice blog that helped me to understand why it is important. You have a real ability to write content that is helpful for us. Thank you for your efforts in sharing such blogs to us. automotive metal fabrication services Dubai

    ReplyDelete
  18. Thanks for publishing such great information. You are doing such a great job. This information is very helpful for everyone. Keep it up. Thanks. Read more info about car removal auckland

    ReplyDelete
  19. This comment has been removed by the author.

    ReplyDelete
  20. You have provided valuable data for us. It is great and informative for everyone. Keep posting always. I am very thankful to you. Read more info about car wrecker

    ReplyDelete
  21. The information you've provided is quite useful about Local Towing Company New Haven CT. It's incredibly instructional because it provides some of the most useful information. Thank you for sharing that.

    ReplyDelete
  22. Nice info, I am very thankful to you for sharing this important knowledge. This information is helpful for everyone. Read more info about Tractor Parts Online Kenya. So please always share this kind of information. Thanks.

    ReplyDelete
  23. The information you've provided here is fantastic because it provides a wealth of information that is really useful to me. Thank you for sharing about mazda skyactiv engines in this post.

    ReplyDelete
  24. I generally check this kind of article and I found your article which is related to my interest.manchester airport transfers Genuinely it is good and instructive information. Thankful to you for sharing an article like this.

    ReplyDelete
  25. Nice info, I am very thankful to you that you have shared this special information with us. I got some different kind of knowledge from your web page, and it is really helpful for everyone. Thanks for share it. Read more info about antique flywheel engines for sale

    ReplyDelete
  26. Nice info, I am very thankful to you that you have shared this special information with us. I got some different kind of knowledge from your web page, and it is really helpful for everyone. Thanks for share it. Read more info about motorized bicycle canada

    ReplyDelete
  27. This is excellent and important information which is shared by you. This info is meaningful and important for us to increase our knowledge about it. Always keep sharing this kind of information. limo service baltimore county

    ReplyDelete
  28. I generally check this kind of article and I found your article which is related to my interest.chain pulley block manufacturer in india Genuinely it is good and instructive information. Thankful to you for sharing an article like this.

    ReplyDelete
  29. Thanks for your post. It's very helpful post for us. You can also visit astro a5 transmission for sale for more Victor Steel related information. I would like to thanks for sharing this article here.

    ReplyDelete
  30. Thank you for providing me with such valuable information about Final Drives for Excavators. This article provided me with some useful knowledge. Continue to make posts like this.

    ReplyDelete
  31. Love to read it,Waiting For More new Update and I Already Read your Recent Post its Great Thanks. 25mm Lowering Sport Springs for GT

    ReplyDelete
  32. I read the above article and I got some knowledge from your article. It's actually great and useful data for us. Thanks for share it.bmw repair greensboro nc

    ReplyDelete
  33. I really appreciate your work which you have shared here about the Business. The article you have shared here is very informative and the points you have mentioned are very helpful. Thank you so much.car financing alberta site.

    ReplyDelete
  34. I just need to say this is a well-informed article which you have shared here about to sell my motorcycle. It is an engaging and gainful article for us. Continue imparting this sort of info, Thanks to you.

    ReplyDelete
  35. I really appreciate your work which you have shared here about the Sells. The article you have shared here is very informative and the points you have mentioned are very helpful. Thank you so much.Online Car Buying from the Usa site.

    ReplyDelete
  36. Wow, What an Excellent post. I really found this to much informative. It is what I was searching for. I would like to suggest you that please keep sharing such type of info.Used Trucks Auction Usa site.

    ReplyDelete
  37. You wrote this post very carefully.cnc profile cutting machine The amount of information is stunning and also a gainful article for us. Keep sharing this kind of articles, Thank you.

    ReplyDelete
  38. You are providing good knowledge. It is really helpful and factual information for us and everyone to increase knowledge. about Car Parts Online Supplier in Dublin .Continue sharing your data. Thank you.

    ReplyDelete
  39. Decent article, your article has everything which I want. You have given a piece of useful information about the Ashok Leyland Parts in Kenya.Excellent post. .

    ReplyDelete
  40. Excellent information, this knowledge is excellent and very important for everyone. I am heartily thankful to you for providing this kind of information. Thanks once again for sharing it. HELI forklift parts dealer

    ReplyDelete
  41. I read the above article and I got some knowledge from your article. It's actually great and useful data for us. Thanks for share it.Used Cars in Gainesville Ga

    ReplyDelete
  42. You have given great content here.Windshield Replacement Service in Dallas I am glad to discover this post as I found lots of valuable data in your article. Thanks for sharing an article like this.

    ReplyDelete
  43. The delightful article you have posted here perrysburg oil change. This is a good way to increase our knowledge. Continue sharing this kind of articles, Thank you.

    ReplyDelete
  44. The article is fantastic to read. Completely informative. I found this essay to be very interesting. Your writing style and ability to explain things clearly are both excellent us sedan miami Thank you for such an informative article.

    ReplyDelete
  45. You have given extraordinary substance here.Velocity Throttle Sensitivity Controller in USA I'm happy to find this post as I tracked down bunches of significant information in your article. Gratitude for sharing an article like this.

    ReplyDelete