I want to thank WIL44 for his thread on his install it helped me plan things out a lot. His pics were worth a thousand words, so want to thank you for taking the time to document your install. His thread if anyone else wants to check it out.
I haven't had as much time to work on this as much as I would want to. My suspension components have been sitting here for about a month now. Had some time to install the ride height sensors. The ride height sensors for the ridetech system is a little bigger than the one for the accuair system but same concept, just had to make sure there were no issues with the wheel or suspension arms etc getting in the way. I haven't test fitted my wheels on but I did take measurements etc of it and based off of it I'm fairly certain everything will clear, or hopefully will <fingers crossedd> .
Everything is mounted and the lining was trimmed so it doesn't get in the way.
Was in a rush and didn't get a chance to take any pics of the front sensors installed but hopefully sometime next week I'll be able to install my suspensions and I'll take it then.
My front bags, took it apart to add a little anti seize to the threads just to be on the safe side.
Post a Comment