Sunday, April 12, 2015

SC430 with LS400 brake upgrade

Over the week I was experiencing a vibration between 40 and 50mph and I could hear my brakes squealing occasionally. So on Sunday finally had time to deal with it. I already had LS400 brakes and rotors ready to be put on, this just forced me to do it. 

I'm not going to go in depth on the installation since it's been well documented but I'll post a few pics during the process and a pic with where I cut the heat shield for reference.

These are the calipers that are going on. I did rebuild them and made a blog post on it earlier.Also had them painted, shout out to Jeremy from the body shop for this.


This is the RCA spacer I used, one piece aluminium. CNC Speedshop in Zebulon, NC made these for me, comes with class 12.9 bolts and washers. Fit was perfect. 


Used a m12x1.25 tapping tool and wd40 to clean out the bolt holes on the knuckle where the ball joint bolt goes through. Cleaning it is crucial because any debris or dirt can falsify torque specs.


Pic of the threads all cleaned up.


This pic is for reference, might help somebody else wanting to do this upgrade. The pink line denotes where I cut the heat shield, I was trying to take as little of it off to keep as much of the functionality of the heat shield. 


This is the heat shield cut and the hub after the surface rust was removed and coated with high temp paint. 


I was getting late at this point so didn't stop to take pics. Torque spec on the bolts with the RCA is 85ft-lbs, stock torque spec is 83 ft-lbs but the class 12.9 bolt will have no problems at that spec. Everything else is like stock, install rotors and screw on the loaded calipers. I did replace my lines with some stoptech stainless steel brake lines, front and back. Also did a full brake fluid flush with Amsoil Dot 3 brake fluid. 

I'll post pics of the completed job later on.

-AJ Abraham

Follow me on Instagram:
@flawless_fitment
@aj_ls460 
@aj_lx470
@aj_sc430

Thursday, March 26, 2015

SC430 Tint redone!

With summer right around the corner I wanted to get the tints on my car redone, they were faded to an ugly purple. Steamed the tints off and got rid of all the excess glue. I don't understand people who drive around in expensive cars and cheap out on tint! Why would you not spend the little extra to and put good tint on and not use the dye based tint!! You can see that the tint started off black and has faded to a bluish purple!! Please use a ceramic, hybrid or metal based films. 

Anh-tuan did the rear window's, don't know why we decide to do random stuff at night. Well it was dark and chilly but we got the tint off with minimal glue residue. Stopped with that and I let my tint guy do the rest.




Went up to my tint shop and put some samples up. Gonna drive around and see which one I like.


I think I'm ready for the summer. Picked out a tint which has a slight reflectiveness to it to flow with the color of the car. Black tint IMO would've stood out a little. I'm happy with it, have to give it a couple of days and go back to get the rears windshield a once over to get some air pockets out around the defroster lines. 




-AJ Abraham

Follow me on Instagram:
@flawless_fitment
@aj_ls460 
@aj_lx470
@aj_sc430

Sunday, March 22, 2015

SC430 Air ride install

Over the week I got some time to finally install my air ride suspensions. I wanted to try a couple of different things so did the install at D2. Was trying to do it after work so took two days just because I wanted to try some new different bags that we were testing along with different length collars etc. Happy to say that everything is on and works AWESOME!! When the car is raised to stock ride height it drives beautifully, even lowered it drives amazing. Just waiting on a couple of pieces from ridetech to complete everything. But been driving it for the past two days and I'm very happy.

All the wiring, lines, valve body, ecu etc in the trunk..


Rear bag setup with ride height sensors...


Front bag setup with ride height sensors..


How the car sits aired out..




Now just need to put my wheels on, alignment, get the fenders rolled and go from there.

-AJ Abraham

Follow me on Instagram:
@flawless_fitment
@aj_ls460 
@aj_lx470
@aj_sc430


Sunday, March 8, 2015

SC430 Air ride install plan and prep II

I want to thank WIL44 for his thread on his install it helped me plan things out a lot. His pics were worth a thousand words, so want to thank you for taking the time to document your install. His thread if anyone else wants to check it out.
http://www.clublexus.com/forums/sc-4...pension-4.html

I haven't had as much time to work on this as much as I would want to. My suspension components have been sitting here for about a month now. Had some time to install the ride height sensors. The ride height sensors for the ridetech system is a little bigger than the one for the accuair system but same concept, just had to make sure there were no issues with the wheel or suspension arms etc getting in the way. I haven't test fitted my wheels on but I did take measurements etc of it and based off of it I'm fairly certain everything will clear, or hopefully will <fingers crossedd> . 





Everything is mounted and the lining was trimmed so it doesn't get in the way. 

Was in a rush and didn't get a chance to take any pics of the front sensors installed but hopefully sometime next week I'll be able to install my suspensions and I'll take it then. 



My front bags, took it apart to add a little anti seize to the threads just to be on the safe side.

Sunday, March 1, 2015

SC430 Air ride plan and prep

My air ride came in last week but haven't had a chance to work on it any. Had the day off today so wanted to figure out where I can place everything. Wow, there is NO room in the trunk and I ordered these mammoth air zenith compressors which I wish I hadn't. The smaller viair 444c could fit well in the cubby on the left and right of the trunk. Well spilt milk, so after removing all the panels etc figured out the only place I could put the compressors etc would be showing in the trunk, my initial plan was to try to hide the compressors and maybe just have the tank showing. I am able to mount the valve body ecu and wiring etc in the 'wheel well'. Got some mdf traced out the carpet with a little excess sanded it down to fit perfectly and made stands on the edges so the board sits flat and can handle the weight of the compressors and anything else I throw in the trunk. 

Here are some pics of how it sits.




I ended up breaking the edge of the plastic trim where the door latch is so need to find one of those now.. I'm not exactly sure when I'll be able to get more done but I'm hoping soon. Plan is to mount the level sensors next and then on another day run air lines etc and install suspensions.

-AJ Abraham

Follow me on Instagram:
@flawless_fitment
@aj_ls460 
@aj_lx470
@aj_sc430